Infrared ECU 220VAC Wall Outlet Controller with Remote – Inclusive Inc

May 12,2024

Features: Control lamps, fans, older style radios or TVs without a remote - virtually any electrical device or appliance you plug into an outlet Controls up to three lamps or devices simultaneously (all controlled together) Learning IR InfraRed remote receiver works with virtually all existing infrared handheld remotes.

Features:

Control lamps, fans, older style radios or TVs without a remote - virtually any electrical device or appliance you plug into an outlet
Controls up to three lamps or devices simultaneously (all controlled together)
Learning IR InfraRed remote receiver works with virtually all existing infrared handheld remotes you already have for TV/DVD/Satellite/Cable/etc.
Sensitive wide IR reception angle - does not require strict line-of-sight during operation
Maximum total power: 220VAC 2A 500W for International customers
- Do not exceed maximum total power or you will damage! Read your device's label. i.e. One 500W compact space heater or 3 100W lamps

Usage:

Before starting, you will need any infrared handheld remote such as for your TV or stereo. Choose a button on the remote you rarely or otherwise never use. [Idea: If you have a universal remote, one of its modes, i.e. VCR, that you are not using can be programmed to any device code such as 1111. Then the power button of your universal remote for that VCR mode will control the Infrared ECU AC Wall Outlet Controller.]
Plug any 220 VAC device up to 2 Amps such as a lamp or fan into the Infrared ECU AC Wall Outlet Controller. The plug on the front accepts polarized and grounded plugs, while the 2 smaller plugs on size will accept small non-polarized plugs. The sockets are universal and will work with most plugs from around the world.
Control 1 device or up to three devices simultaneously. All three devices will go on and off together, it is not possible to control the three devices separately or individually.

Training:

Push the little black button on the front of the Infrared ECU AC Wall Outlet Controller to turn on the device you have plugged into it. The red LED on the front will be lit.
Push and hold the black button. Your device will turn off but then after about 3-5 seconds it will turn back on, then let go of the black button. Now the red LED on the front will be flashing.
While the red LED is flashing, push any button on any infrared handheld remote pointing the remote at the Infrared ECU AC Wall Outlet Controller. The controller will learn the infrared signal from your handheld remote and the red LED will go out.
Test by pushing the button you just trained on your infrared handheld remote and the device plugged into the controller should turn on and off. Finally, if using the Infrared ECU AC Wall Outlet Controller with an environmental controller (ECU) such as the VoiceIR Environmental Voice Control System VoiceMe, use the button you just trained on your infrared handheld remote to train your ECU.

.
Features: Control lamps, fans, older style radios or TVs without a remote - virtually any electrical device or appliance you plug into an outlet Controls up to three lamps or devices simultaneously (all controlled together) Learning IR InfraRed remote receiver works with virtually all existing infrared handheld remotes you already have for TV/DVD/Satellite/Cable/etc. Sensitive wide IR reception angle - does not require strict line-of-sight during operation Maximum total power: 220VAC 2A 500W for International customers Do not exceed maximum total power or you will damage! Read your device's label. i.e. One 500W compact space heater or 3 100W lamps Usage: Before starting, you will need any infrared handheld remote such as for your TV or stereo. Choose a button on the remote you rarely or otherwise never use. [Idea: If you have a universal remote, one of its modes, i.e. VCR, that you are not using can be programmed to any device code such as 1111. Then the power button of your universal remote for that VCR mode will control the Infrared ECU AC Wall Outlet Controller.] Plug any 220 VAC device up to 2 Amps such as a lamp or fan into the Infrared ECU AC Wall Outlet Controller. The plug on the front accepts polarized and grounded plugs, while the 2 smaller plugs on size will accept small non-polarized plugs. The sockets are universal and will work with most plugs from around the world. Control 1 device or up to three devices simultaneously. All three devices will go on and off together, it is not possible to control the three devices separately or individually. Training: Push the little black button on the front of the Infrared ECU AC Wall Outlet Controller to turn on the device you have plugged into it. The red LED on the front will be lit. Push and hold the black button. Your device will turn off but then after about 3-5 seconds it will turn back on, then let go of the black button. Now the red LED on the front will be flashing. While the red LED is flashing, push any button on any infrared handheld remote pointing the remote at the Infrared ECU AC Wall Outlet Controller. The controller will learn the infrared signal from your handheld remote and the red LED will go out. Test by pushing the button you just trained on your infrared handheld remote and the device plugged into the controller should turn on and off. Finally, if using the Infrared ECU AC Wall Outlet Controller with an environmental controller (ECU) such as the VoiceIR Environmental Voice Control System VoiceMe, use the button you just trained on your infrared handheld remote to train your ECU.

Enables UIS controllers to work with outlet-powered devices like humidifiers, heaters, dehumidifiers, and A/Cs. Only equipment that can automatically start running when plugged into an outlet are compatible. Control and monitor your grow on your phone from anywhere with our latest WiFi-enabled UIS controllers. Automate climate triggers, cycles, timers, and scheduling; unlock data graphs and alert notifications via our app.

AC Infinity UIS Control Plug for Outlet-Powered Equipment

Replacement URC3220 Cox RF Remote control for the Cox mini box and basic control of TVs.

(1 Pack) Replacement Cox IR Remote Control Urc-3220 for Cox Mini Box

Operate 3 different home appliances from across the room, or another area of your house, using one remote control. The signal from the remote travels through walls, windows or doors. Use the remote outlets in one room or multiple locations; beneficial for the mobility-impaired and anyone who just wants a one-touch, convenient way to turn lighting or appliances on and off.

Woods 13569 13569WD Indoor Wireless Remote Kit Up to 66 ft. Range, Ideal for Holiday Decorations, Works Through Walls Windows and Doors, Controls Up

Woods 13569 13569WD Indoor Wireless Remote Kit up to 66 ft. Range; Ideal for Holiday Decorations; Works Through Walls Windows and Doors; Controls up to 3 Devices; 3-Outlet Pack; White/Orange - Electrical

RPC Series Remote Power Control uses classic style connections, and is ready to combine with a variety of switches or sequential control devices that

Remote Power Control with 2–20A Outlets

Dell Microsoft Windows Media Center MCE RC6 IR Remote Control USB Receiver Kit

Infrared ECU 220VAC Wall Outlet Controller with Remote – Inclusive Inc

SMART IR REMOTE CONTROLLER - Support 50,000+ infrared controlled devices(38kHz). Such as air conditioning, TV, set-top box, TV box, DVD, projector,

Smart IR Remote Controller, Smart Air Conditioner Controller, Smart IR Hub IR Blaster for Home Automation, Work with Alexa Google Home

Infrared ECU 220VAC Wall Outlet Controller with Remote – Inclusive Inc

Controller & Executive Controller

Woods 13569 Indoor Wireless Remote Control with 3-Outlets, 3-Pack, White

eMylo WiFi Smart IR RF Remote Controller, USB Smart IR RF Remote Control Compatible with Alexa and Google Assistant, IR Blaster for Air Conditioner, TV, Blind, RF Switch, Garage Door

INTECHING 03-00131-20 Projector Remote Control for Smart LightRaise 40wi/ 60wi/ 60wi2/ 60wi2-SMP, U100, U100w, UF55, UF55w, UF65, UF65w, UF70, UF70w, UF75, UF75w, UX60, UX80, V25, V30 : Electronics