STL file IKEA like SNURRAD Storage turntable for fridge storage

May 10,2024

Storage turntable for your fridge Size of turntable 30 cm x 40 cm x 3 cm you only need additional 3 cm at back of turntable to have enough space for full turn, due to Reciprocating mechanism it should only be rotated clockwise. Optimized size and cut for Prusa Glue all four parts of stand Glue all four parts of turntable connect them via gear and pin Glue pin to gear and ready. I used small drops of hot glue to keep it in one place on glass shelf, to avoid lose height but you can use rubber suction cups like in original. I upload uncut parts if someone has such a large working area or wants to cut the model differently Pulls out and revolves 360° giving you a good overview and easy access to the things you need. Minimizes food waste since food isn’t forgotten in the back of your fridge. The raised edges of the shelves keep things in place. Fits in most fridges. The 3D model has been divided without any tolerance margin and requires manual alignment through refining. The files contain the entire undivided model, so if you have a smaller printer workspace or prefer to combine parts differently, feel free to divide it yourself.