NTI PWR-RMT-RBT-C13-D Low-Cost Remote Power Reboot Switch

May 30,2024

CLICK HERE for this NTI PWR-RMT-RBT-C13-D Low-Cost Remote Power Reboot Switch w/ IEC320 C13 Outlet.
This NTI PWR-RMT-RBT-C13-D Low-Cost Remote Power Reboot Switch with IEC320 C13 Outlet & 2 Digital Inputs/Outputs. Remotely control power on/off/reboot to a server, router, web cam, firewall or other remote device over IP. The ENVIROMUX® Remote Power Reboot Switch is used to remotely reboot and control power (on/off) to a server or other powered device over IP. NTI PWR-RMT-RBT-C13-D Low-Cost Remote Power Reboot Switch with IEC320 C13 Outlet Features: Two operating modes for power reboot: Manual – select the outlet and turn the power on/off/cycle. Auto – scheduled, triggered, or configurable combination. Scheduled – set date/time/duration of power cycle. Triggered Power on/off a device when a sensor connected to the digital input changes state. Reboot (power cycle) and control power (on/off) to unresponsive IP devices that are connected to the PWR-RMT-RBT-C13 power outlet. Configure, control, and monitor the unit via the easy-to-use web interface or HTTP REST API – makes it easy to control power from anywhere in the world. Two digital inputs to monitor alarm contacts, environmental sensors, relays, and switch closures. Shut down power when water or other environmental threats are detected. Two digital open collector outputs for control of external devices – drive relays for process control, security, and environmental controls. Digital outputs activate upon triggered event or via the user interface. Monitor (ping) up to two IP network devices. Unresponsive IP devices can be configured to trigger the outlet of PWR-RMT-RBT-C13 to power on/off/cycle. Automatically configures network settings received from a connected DHCP server. If a DHCP server is not found, the default static IP address will be used. Dual password protection with separate user and administrator passwords. Integrated mounting brackets for easy surface/wall mounting. Optional DIN mounting available. The Remote Reboot Switch is the ideal solution for many applications, such as: Remote reboot of any device, router, server, kiosk, etc. The device need not be network attached. Secure sensitive devices by keeping them powered off when not in use. This prevents hackers from detecting them at all times. Power down equipment when not needed for power savings and to save on wear and tear. Power up alert devices (sirens or lamps) or environmental systems (heaters, coolers, pumps, etc.) Cascade an unlimited number of PWR-RMT-RBT-C13 using the digital I/O screw terminals. For a single user interface, use with E-MNG-SH Self-Hosted Enterprise Environment Monitoring System Management Software. (Support coming soon.) Flash upgradeable. Features coming soon: Compatibility with E-2D, E-5D, and E-16D as an IP sensor. Compatibility with E-MNG-SH Self-Hosted Enterprise Environment Monitoring System Management Software. Why not buy this NTI PWR-RMT-RBT-C13-D Low-Cost Remote Power Reboot Switch with IEC320 C13 Outlet today? NTI PWR-RMT-RBT-C13-D Low-Cost Remote Power Reboot Switch with IEC320 C13 Outlet Specifications: Power 90 to 264 VAC at 50 or 60 Hz Power switching: up to 15 Amps at 105-125 VAC, 10 Amps at 210-240 VAC Power consumption: 1.4W max Input connector: one IEC 320 C14 plug IEC 320 C13 to country-specific power cord included for connecting to AC source. Output connector: one IEC 320 C13 receptacle IEC 320 C14 power cord for connecting to device sold separately. Digital Inputs Two screw terminal pairs for connecting dry contact devices Accepts 26 to 16AWG wire Potential free Voltage range: 0 to +36VDC Over-voltage surge protected Digital Outputs Two screw terminal pairs for open-collector outputs Accepts 26 to 16AWG wire Rated sink current: 500 mA per output +5VDC, 22kΩ pull-ups Voltage range: 0 to +24VDC Over-voltage surge protected Network Interface One female RJ45 connector. 10Base-T Ethernet interface, 10/100 network compatible. 5 ft (1.52 m) CAT5E cable included. Protocols HT…