Mold Making Silicone Thinner - GT Products, Inc

May 30,2024

GT Products silicone thinner can be used to drop the viscosity of any mold making silicone. This thinner is a 50 Centistoke Dimethyl Fluid and will be compatible with any GT Products Silicone system. Lowering the viscosity of a mold making system can allow the silicone to easier flow into smaller detail. GT Products, Inc. recommends only adding 3% to 5%. Adding too much silicone fluid can adversely effect the physical properties of the silicone itself. Tear and tensile strength will be the most greatly effect properties if too much silicone thinner is used.

How To Make Silicone Molds For Resin – iSTOYO

Football Silicone Mold - Sports Molds - Silicone Zone Life is Art!

Manufacturing Price of Liquid 2 Parts Silicone Rubber Raw Material for Epoxy Resin Product Silicon Mold Making - China Mould, Plastic Mould

How to Put a Wick in a Candle Mould: Your Step-by-Step Guide – Myka Candles & Moulds

Silicone Thinner

GT Silicon - Silicon Manufacturer/ Factory-RTV-2 Silicone, Liquid Moldmaking, LSR, Platinum Silicone

Mold Max™ 30 Standard - 1.1kg - AMT Composites

Silicone Thinner is a clear silicone fluid that can be added to reduce the viscosity of Silicone RTV. Ideal for creating a bubble-free skin coat before adding a thick layer. Use no more than ten parts of thinner to 100 parts of silicone by weight. The thinner will increase working time and decrease final hardness and tear strength. Silicone Thinner is available in two oz and eight oz.

Tap Silicone Thinner | 2 oz. Silicone Fluid Thinner

Silicone Mold Putty - All Sizes – brickintheyard

Mold Max™ 60 Silicone Mold Rubber Product Information

Polytek - Chemical Concepts

TAP Silicone Thinner : TAP Plastics

SLIDE® Polycarbonate Mold Release No. 41412

Silicone Thinner