MBus_WTH_LCD_ETH: ModbusTCP / ModbusRTU Wall Temp/Humidity Sensor w/ L – DataNab LLC

May 25,2024

Part #: MBus_WTH_LCD_ETH This Modbus-TCP and Modbus-RTU enabled temperature & humidity sensor is designed to be mounted on a wall or a surface. It has a backlit LCD display and can communicate with a supervisory control system on an Ethernet TCP/IP network using the Modbus-TCP protocol and/or on an RS485 network using the Modbus-RTU protocol. The sensor also has two 0-5V / 0-10V / 4-20mA analog outputs that can provide a signal equivalent to the current temperature & humidity values. This enables the sensor to be read by simple analog inputs and/or allows the sensor to be used as a dual transducer to directly control two actuators or valves based on temperature or humidity.

Modbus 温湿度传感器+ 4路继电器+ DTU 透传接入ThingsCloud-CSDN博客

Part #: MBus_WTH_LCD_ETH This Modbus-TCP and Modbus-RTU enabled temperature & humidity sensor is designed to be mounted on a wall or a surface. It has

MBus_WTH_LCD_ETH: ModbusTCP / ModbusRTU Wall Temp/Humidity Sensor w/ LCD and 2 analog outputs

Sn Th Sensor Modular Temperature Humidity

Part #: MBus_io12_LCD The MBus_io12_LCD is a fully programmable Modbus I/O device with an LCD Display and a built-in temperature sensor. It is a

MBus_io12_LCD: Fully Programmable Modbus I/O device with LCD Display

The voltage conversion sensor module is DD4012SA, a high-efficiency and low-heat voltage converter By modifying the RS485 address, up to 247 module s

LED Temperature Humidity Sensor Digit Display RS4 85 Modbus RTU Humidity Temperature Sensor External Sensor

Modbus 温湿度传感器+ 4路继电器+ DTU 透传接入ThingsCloud-CSDN博客

The voltage conversion sensor module is DD4012SA, a high-efficiency and low-heat voltage converter By modifying the RS485 address, up to 247 module s

LED Temperature Humidity Sensor Digit Display RS4 85 Modbus RTU Humidity Temperature Sensor External Sensor

Grove Temperature & Humidity Sensor

RS-WMB, RD-WMB Data Sheet

Temperature, humidity and CO2 transmitter Our affordable temp / humidity / CO2 transmitter for wall mount installation has four outputs, three analog

Temperature/Humidity/CO2 transmitter modbus

MBus_WTH_LCD_ETH: ModbusTCP / ModbusRTU Wall Temp/Humidity Sensor w/ L – DataNab LLC

NT28B16 RS485 Temperature Collector Modbus RTU Paperless Recorder 10K/20K/50K/100K B3950 NTC Sensor

How to Publish DHT11 Sensor Data from NodeMCU to Modbus TCP Server and Read it in Ignition SCADA

DISCONTINUED Suggested replacement: TSH300v3 3.0% relative humidity precision temperature and humidity sensor with 12-bit and 14-bit for temperature

TSH300v2