Simpson Strong-Tie Joist Hanger 9.13 H x 1.56 W 18 Ga. Steel LSSR210Z
Simpson Strong-Tie Joist Hanger 9.13 H x 1.56 W 18 Ga. Steel LSSR210Z
The patent-pending LSSR light slopeable/skewable rafter hanger is the next generation of a field-adjustable rafter hangers. One of its key features is that it can be installed after the rafter has been tacked into place. A versatile hanger, it is field adjustable for skews up to 45° and features an innovative hinged swivel seat which adjusts up to a 45° slope.
Simpson Strong-Tie HUS Galvanized Face-Mount Joist Hanger for 1-3
Simpson Strong-Tie 9.13 in. H X 1.56 in. W 18 Ga. Steel Joist
Simpson LSSR1.81Z Field Adjustable Rafter Hanger - Zmax Finish
Simpson Strong-Tie Single 2-in x 6-in 18-Gauge Zmax Rafter Hanger
Simpson LSSR210Z Field Adjustable Rafter Hanger- ZMAX Finish
9.13 in. H X 1.56 in. W 18 Ga. Steel Joist Hanger
The BA is designed for engineered wood and solid sawn lumber applications. This top-flange hanger can carry medium loads with solid sawn lumber and higher loads with engineered wood products. The BA features minimum nailing with positive-angle nailing (PAN) to target moderate load conditions and maximum nailing to support higher loads.
Simpson Strong-Tie BA1.81/11.88 1-3/4 x 11-7/8 Top Flange Hanger
The IUS is a hybrid hanger that incorporates the advantages of the face-mount and top-mount hanger. Installation is fast with the Strong-Grip seat, easy-to-reach face nails and self-jigging locator tabs.
Simpson Strong-Tie IUS2.37/14 Face Mount I-Joist Hanger
Simpson Strong-Tie ZMax 1.56 in. W x 5.25 in. H 18 Ga
Simpson Strong-Tie ZMax 9 in. H x 3.13 in. W 18 speed
Simpson LSSR410Z Field Adjustable Rafter Hanger ZMAX - White Cap
The patent-pending LSSR light slopeable/skewable rafter hanger is the next generation of a field-adjustable rafter hangers. One of its key features is that it can be installed after the rafter has been tacked into place. A versatile hanger, it is field adjustable for skews up to 45° and features an innovative hinged swivel seat which adjusts up to a 45° slope.
Simpson Strong-Tie Joist Hanger 9.13 H x 1.56 W 18 Ga. Steel LSSR210Z
Simpson Strong-Tie ITS2.37/9.5 sets a new standard for engineered wood top flange hangers. The ITS2.37/9.5 installs 2-5/16 x 9-1/2 I-Joists faster and uses less nails than any other EWP top flange hanger. The new Strong-Grip seat and Funnel Flange features allow standard joist installation without requiring joist nails resulting in the lowest installed cost.
Simpson Strong-Tie ITS2.37/11.88 Its Joist Hanger
Simpson LSSR2.56Z Field Adjustable Rafter Hanger - Zmax Finish
Simpson Strong-Tie LUS Galvanized Face-Mount Joist Hanger for 4x6
